or



 

CR-3000 ROLL-ON CONVEYOR HOT STAMP MACHINE


The CR-3000 offers a better alternative to hot stamping flat parts. Unlike the standard vertical hot stamp press, roll on decorating makes for much better decorating. In a vertical press air entrapment can occur causing voids in the print. The inherent design of the roll-on decorator causes all of the air to be forced out as the part moves under the decorating head.

In our machine we decided to incorporate a photo-eye for machine actuation. In other words, the head will not extend down and the foil will not begin to pull until a part trips the photo-eye. This reduces foil scrap and allows the operator to simply place the part on the conveyor without having to actuate a start circuit manually.






Features
  • Manual Emergency Stop
  • Infrared Temperature Sensing
  • Air Blast Cool Down During Power Failure
  • Overheat Protection, Senses if Roller Stops Turning
  • All Needle and Roller Bearing Construction
Options:
  • Operator Interface
  • Palletized Conveyor
  • Custom Ground Heated Roller
  • Decal Transfer Advance
  • Automated Loading and/or Un-Loading
image

Visit our HOME screen to view Stamprite's complete line of Hot Stamping equipment

 
image
image
  image